A rock-climbing wall is used as a substitute for outdoor rock climbing for people who cannot frequent these outdoor locations. Conveniently located inside the city, this is easily accessible by people who are passionate about this hobby. These walls also have hand and feet grips. Materials used for constructing these walls include wood, brick or the multiplex boards which are thick and have drilled holes to attach ropes for safety. Steel and aluminum walls that were manufactured recently have also been used. Some of these walls have the facility whereby the belay ropes can mountain bike tyres be attached to them. This makes sure it is hundred percent safe to practice lead climbing or bouldering. Each hole has a t-nut which is specially made for this purpose. This enables the handholds to be fastened to the walls. The outer surface of the multiplex board rock climbing Mountain Bike Tyres wall surface engulfed with textured products that include paint, concrete along with polyurethane laden with sand. In addition to the textured surface and handholds, the wall may also have surface structures such as protrusions and indentions, or take the form of an overhang, under hang mountain bike tires or a crack. The idea of the artificial rock climbing wall began in the UK. Don Robinson, a lecturer in Physical Education and founder of DR Climbing Walls, constructed the first wall in 1964 at Leeds University by inserting pieces of rock into a corridor wall. However the first commercial wall was built in Sheffield, traditionally England’s center for climbing due to its proximity to the Peak District. Climbing activities in gyms is becoming a very popular urban sport that provides many individuals with the opportunity to experience the thrilling sport of rock climbing.